Ergonomic Face Mask Sewing pattern and step by step sewing tutorial

Spread the love

I hope you are dowing well.

We have chosen to include an easy Ergonomic Face Mask Sewing pattern and step by action stitching tutorial in 2 various adult sizes

DISCLAIMER: this is not a medical supply and should not utilize as a protective gadget

Here is the tutorial:

Cut 4 pieces of primary fabric and 4 pieces of fusible interfacing to the table

Include the fusible interfacing to the mask by ironing the interfacing on a moderate temperature. Place both pieces of material together, best sides facing and stitch them with a 3/8 inch joint allowance. cut the excess fabric and press flat.

open flat.

Sew the pieces together with a 3/8 inch joint allowance. Press flat and trim t he excess material

turn the fabric to the other side and press once again. Bring the elastic to the table

Place both sides of the fabric together and sew upper and lower seams with a 3/8 inch joint allowance.

Place the elastic and place them on the notch. Stitch the sides with a 1/4 inch joint allowance.

And you are prepared!

Download t he submit listed below:

Your e-mail address will not be published. Needed fields are marked *

This content was originally published here.

Leave a Reply