DIY Face Mask Tutorial – LISOF

DIY Face Mask Tutorial – LISOF

Throughout this worldwide pandemic, you may feel nervous and defenseless, but in fact– haute couture trainees can utilize their sewing abilities to help themselves, friends and family. See this fast clip of the importance of using a face mask during the Covid-19 pandemic.

Caileigh-Jayne Davis is a LISOF Alumna and speaker. She developed 2 face mask patterns. Pick which one you believe is best and get started. A lot of fashion students have scrap fabric and these masks are little sufficient to use a very little quantity from your material stash. Easy completely discussed directions below along with downloadable pattern. Complete video tutorials down listed below Share you masks with us using the hashtag: #LISOFfacemask on Instagram, tag: @lisof- fashion on Twitter tag: @lisof and on Facebook at LISOF Fashion Education

What you’ll need for Panel Face Mask No. 1

ACTION 1– CUT THE FABRIC.

MATERIAL–.
Cut along the pattern, it already has Joint Allowance added.

The simplest.
way to cut this is to have the fabric cut on fold, to get the ideal mirror.
imaged pieces. Cut one layer ‘outer’ and one layer ‘lining’.

FUSING–.
Cut along the pattern, it already has Joint Allowance included.

The easiest.
method to cut this is to have the fabric cut on fold.

STEP 2–.
FUSE THE LINING PIECES.

On the.
Wrong Side of the Lining pieces push the Fusing Glue side down.

STEP 3–.
STITCH THE CURVE.

Put the.
Right-Hand Side of the Outer and Lining Together, then sew along the curve.
with a 1cm Joint Allowance. Clip

ACTION 4–.
CLIP THE CURVE.

STEP 5–.
PRESS.

Press joints.
to one side

ACTION 6–.
SEW THE TOP AND BOTTOM.

Put the.
Lining and Outer together Right-Hand sides together, stitch closed with a Foot.
sew [7mm] Do not sew the sides closed.

ACTION 7–.
BAG OUT.

Turn the.
Do It Yourself mask to the Right side through the side piece. Press.

ACTION 8–.
END UP ENDS.

End up the.
raw edges with an Overlocker or a Zig Zag sew.

STEP 9–.
INCLUDE ELASTIC TO COMPLETE.

Include elastic.
to the corner, secure the flexible on at 7mm. Turn the edge over and edge sew.
to finish.

What you’ll need for Panel Face Mask No. 2

STEP 1–.
CUT A SQAURE [OFF THE PATTERN]

Ensure.
to notch the Material.

ACTION 2- HEM.
THE TOP AND BOTTOM.

On the.
Incorrect side of the Fabric, press over the raw edge of 1cm, and after that another 1cm,.
producing a FOLD ON FOLD HEM. Stitch the hem with an EDGE stitch.

STEP 3–.
PLEATING

Fold 3.
pleats into the fabric through using the Notches from the Pattern.

Stay stitch.
the pleats down the sides with a Foot stitch [7mm] to hold them in place.

ACTION 4–.
END UP ENDS.

Complete the.
raw edges with an Overlocker or a Zig Zag sew.

ACTION 5–.
ADD ELASTIC TO COMPLETE.

Include elastic to the corner, protect the flexible on at 7mm. Turn the edge over and edge stitch to finish.

This content was originally published here.

Leave a Reply