Thinking of trying a face mask sewing pattern? Today I’m sharing lots of tips to help when making DIY face masks. There are several popular face mask sewing patterns out there and if you’re like me, it can be a little confusing which one to choose. Which style? How to fasten? I’ve been trying out several different homemade fabric face mask patterns the past few weeks & experimenting & making mistakes that I want to share with you to save your time and supplies. Read this post to help you make your own decision about choosing a fabric face mask pattern to sew for non-medical use.

Want to add nose wire to your face mask? I’ll show you at the end of this post how to add nose wire to either mask style.

BUT FIRST, READ & AGREE TO THIS DISCLAIMER: I have not scientifically tested any of patterns. I don’t know how well they work, or if they work at all.  I am not a health professional nor a scientist. I make no warranties that these face masks successfully reduce or eliminate anything that you’d prefer not to breathe into your body. Any user of this review, the tutorials, designs, or any products created therefrom assumes the risk of serious injury or death. For information on how to reduce the transmission of smoke particles, pathogens, or allergens, please consult a qualified and competent health care professional or respected scientist (and I am neither).

Types of DIY fabric face mask sewing patterns

I tried out several variations of two different general types of DIY face mask sewing patterns:

I tried out different styles, sizes, and ways to fasten them — elastic, fabric ties, ear loops, etc. — on myself, my husband, and my kids. I’ll describe my experience with these face mask sewing patterns below. Be sure to also read this article on how face masks should fit so that you can determine if your handmade face mask fits properly.

Pleated fabric DIY face mask sewing patterns

This pleated fabric DIY face mask style visually looks very similar to store-bought paper masks, and there are tons of pleated fabric DIY face mask sewing patterns around with all different sizes. I tried out three different pleated fabric DIY face mask sewing patterns:

The pleated style for these three patterns are the same; the sizes are different. Larger folks may prefer Johns Hopkins or Made Everyday. Smaller heads may prefer JOANN or Made Everyday’s alternate sizes. For my head size, cutting one piece of fabric 8″ wide x 12″ tall and folding it in half seemed to fit me the best.

The toughest step in these sewing patterns is making pleats. Making pleats on this style can be tricky at first especially if you’re new to pleats or it’s been awhile since you’ve sewn them. Once you get the hang of pleats, it’s pretty easy. I recommend referring to the Johns Hopkins mask instructions because it has a really good pleating diagram. And here’s a tip: Instead of pinning at 1-1/2″ etc. it’s much faster to just mark the fabric with colored pencils.

It is possible to make a filter pocket with the pleated face mask style. What you’ll do is leave open about 3″ on the bottom of the mask to fit a filter into it. Personally, I think that actually slipping a filter into this small slit seems tricky to do in practice so if you really want a filter pocket then I would consider making the smooth-look DIY face mask sewing pattern, see below.

This pleated-style face mask can be layered on top of a store-bought mask, if desired.

How to fasten pleated face masks? The ear loops vs. behind-the-head ties debate.

There’s quite a debate between ear loops versus behind-the-head ties. I have read that elastic ear loops can make ears sore especially when wearing masks for long periods of time which is understandable. For me, ear loops are easier to take on and off. However, it can be tricky with these pleated face mask sewing patterns get the ear (or head) loops the right size to fit snugly around ears/heads because you sew the ear bands into the mask.

The CDC recently posted a face mask sewing pattern that does allow you to add your ties after the mask is sewn. I’m going to try this pattern next, and I think it will make it easier to get a better fit with the pleated-style face mask.

The knit ties trick at Made Everyday is pure genius & much more comfy than elastic especially for kids. You can use knit ties instead of elastic for ear loops and personally, I think the knit ties are way more comfortable.

In summary, try on one mask first before making a bunch or else you may have a stack of masks that are too big. I found my best fit with the pleated face mask style was with ties around the head because I could bend over and turn quickly with no mask slippage. I recommend putting long hair in ponytails if you go the ties route, though.

My husband and my brother-in-law both rejected the behind-the-head versions. Consider asking the wearer before you choose ear loops vs. behind-the-head.

The smooth-look DIY face mask sewing pattern

There are many patterns out there to make a smooth-looking DIY fabric face mask. I tried Craft Passion’s face mask sewing pattern with filter pocket first and stuck with it. It’s a little more involved than the pleated masks and took me longer to sew each one but for some people the extra time is going to be worth it. Craft Passion offers several sizes — Mens, Womens, Teenagers, Kids.

I like that it’s easier to get a snug fit with this style because you add either ear loops OR head ties (your choice) *after* the mask is sewn. I think this is a big difference. Putting ties on *after* the mask is sewn means that you can more easily adjust the ties to the individual wearer. And you could even change out the ties. Liam didn’t like the elastic feel so I switched his to knit ties, for instance. Like the pleated face mask style, you can choose either ear loops or around-the-head ties with the smooth-look style.

The filter pocket on this style seems easier to me to slip the filter in and out. There’s quite a large pocket on both sides to fiddle with filters and try to get them in straight.

How to add nose wire to face masks (either style)

Now if you really want masks to fit well, or if you have glasses, then adding wire is a must. Wire keeps my mask from slipping down my face. I made my nose wire removable so that I can slip it out before washing and sanitizing masks between uses. I’ll show you two ways how to add nose wire to face masks: one method uses bias tape, one method does not.

Below I’m showing the wire sticking out a little bit so that you can see how I bent the ends into a little circles to avoid pokes. Normally, the nose wire will be totally inside the casing.

Step 1: Cut and sew bias tape onto the top inside of the face mask

I sewed 4″ of bias tape (or you can use a bit of folded fabric) on the top inside of the mask. I tried both single-fold and double-fold bias tape, and I prefer single-fold bias tape because it holds the wire in place a bit better when I wear it. Fold and iron both raw edges in (if desired). Center the bias tape onto the top edge of your mask and pin or clip. Make sure the open edges of the bias tape is on top edge of the mask like the photo below; the folded edge of the bias tape should be on the bottom.

Then sew the bias tape along its open edge to secure it to the mask and close the open edges of the bias tape. If you used double-fold bias tape, you may also want to sew the bottom edge to secure it. I am showing single-fold bias tape below.

No bias tape? That’s OK — alternatively you can slip the wire inside the mask and sew it into place, see the Made Everyday instructions for this. This method makes it more difficult to get the wire out if you’d like to take it out before washing. I tried the no-bias-tape method and it looks like this:

Step 2: Cut a piece of nose wire and insert into the casing

Then I slipped in a piece of removable floral wire / twist ties / pipe cleaner / opened paper clip. Doing this way will allow you to take out the wire before you wash it. Curve the ends of the wire so they won’t poke you when wearing the mask.

Here’s what the nose wire casing looks like inside of the pleated-style face mask:

Step 3: Put on the face mask and bend the wire to fit your nose

Here’s what the nose wire will look like once it’s fully inside the face mask. Put on the face mask and bend the nose wire to better fit your nose.

Tips when sewing DIY face masks for kids

My young kids preferred the knit ties to elastic. You could also try ribbon, fabric ties, or shoestrings. For my kids, it seems that the around-the-head ties has stayed on best (compared with the ear loop style). Below is the around-the-head style from Made Everyday in a kids mask size. However, the bottom tie is too loose around my son’s neck; again, with this mask pattern you cannot easily adjust the ties because they’re sewn into the mask. You can mitigate this by pulling the bottom tie up higher onto the back of kids’ heads. Or you can use the CDC pleated mask sewing pattern which allows for adjustable ties after the mask is sewn. You can use elastic for around-the-head kids face mask. My kids just didn’t like the feel of elastic so we are rockin’ the floral knit ties on all of our kids masks for both boys and girls.

Below are my 1o-year-old’s masks. I used behind-the-head knit ties using the Craft Passion style to allow it to fit snugly on the top & bottom and tied it into a bow. And I added the removable nose wire to her bottom mask.

Final tips when sewing face masks

Last piece of advice: Choose your fabric wisely. There are several scientific studies going on now that test the best material for homemade face masks, so be sure to read do your research before choosing fabric. After making several masks, I realized when I held them up to the light that the fabric was just way too thin. Refer to the patterns above to choose the proper tightly woven fabric. Personally, I prefer a thicker mask that is still breathable, so based on JOANN’s tutorial recommendation I added interfacing to line my masks. If you don’t have interfacing, you could experiment with doubling-up your fabric (so 4 layers of fabric rather than 2) or add a filter pocket, or both. Just make sure that you can still breathe through it.

See the photo below for how to trim the interfacing out of the seams before turning it right-side out. The face mask will be less bulky and easier to turn curves and topstitch if you trim out the interfacing from seams first.

How to wash face masks

The CDC recommends washing face masks – please see their guidelines here. Personally, I wash our fabric face masks inside a lingerie bag to avoid tangling (especially for our masks with ties around the head) and wash them with soap on the highest water temperature possible. I dry them in the dryer. I also remove the nose wire from masks before washing and sterilize the wire before putting it back into a clean mask. But again, I’m not a healthcare expert nor scientist so please refer to them for proper mask sanitation or sterilization.

I hope that this post helps you out when you’re sewing homemade fabric masks for non-medical use. I’d love to hear your tips.

Be sure to pin this DIY face mask free sewing pattern review for later:

And be sure to check out my free sewing patterns.

Like it? Share it!
The nicest way to say you like it is to pin it on Pinterest, post a comment, follow Merriment Design on Facebook, Pinterest, Instagram or sign up for monthly emails. Enjoy! 🙂

Copyright stuff: You’re more than welcome to use this free project and tutorial for personal use. Contact me for commercial use and Etsy sales.

This content was originally published here.

Leave a Reply